liqui-moly

[polywideblock]

anybody used liqui-moly products in their chargers or other classic mopars?just spotted mos  2 anti friction at parts store can't find zddp

[charger Downunder]

In Australia we arn't affected as much with the zinc and its only taken out of certain grades of oil. Just use Penrite oil HPR 30 it has the extra zinc in it.

http://www.penriteoil.com.au/tech_pdfs/149%20LATEST%20ZINC%20LEVELS.pdf

http://www.penriteoil.com.au/tech_pdfs/192%20LATEST%20ZINC%20LEVELS.pdf

[polywideblock]

thanks wish i had of asked earlier i was looking at penrite, also royal purple but $92 for 6 liters    Phil

[440]

In Australia we arn't affected as much with the zinc and its only taken out of certain grades of oil. Just use Penrite oil HPR 30 it has the extra zinc in it.

http://www.penriteoil.com.au/tech_pdfs/149%20LATEST%20ZINC%20LEVELS.pdf

http://www.penriteoil.com.au/tech_pdfs/192%20LATEST%20ZINC%20LEVELS.pdf

This is good to know as I'm not up on Australian oils. When I ask the guy at the front counter about zinc rich oils he looks at me from another planet. Luckily I brought a case of Royal Purple HPS 20/50 back with me.

[68r/t]

The hpr30 used to have around 1400ppm of zinc, i see its now down to 1140ppm,  hpr 40 is nice with the zinc @ 1450ppm but maybe just abit heavy for most us.

[440]

The HPS oil had plenty of zinc and much cheaper than HPR and comes in a wide range of viscosities. I think in some cases some of the HPS oils had more zinc then the HPS. Not sure if this is still true though as I haven't researched oil in a while and they seem to change formulas more often then not.