SUPERBIRD GETS Viper 6 speed T-56 installed into a B body anyone done it ??

[moparstuart]

are you puttin that step bumper on the front of the c500

nope sold it to a customer

[bigblue73]

Stuart - Your cross member is complete!  Let's get cutting! 

Yes folks - you are looking at a 66-70 Mopar B-Body to Tremec Viper Spec T56 / T56 Magnum cross member.  I can't post the car that did the R&D for this until SEMA starts next week.  Cheers!



Tony

[JB400]

 

[moparstuart]

Stuart - Your cross member is complete!  Let's get cutting! 

Yes folks - you are looking at a 66-70 Mopar B-Body to Tremec Viper Spec T56 / T56 Magnum cross member.  I can't post the car that did the R&D for this until SEMA starts next week.  Cheers!



Tony

  awesome tony  your the MAN !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[moparstuart]

American Power train had 10% off today for cyber monday

so i called and ordered the rest of my stuff


Customer Description of Car:
1970
make = Mopar
model = RR
engine = 440 6 pack
hp_torque = 450 hp
tire_size =
flywheel_tooth_count =
current_transmission = Automatic///Viper T56
rear_end_ratio = 3.54 Dana
console = Yes
seats = Buckets
request for =
0.00 0.00
ISGM-20002 ISGM-20002 GM ISO-X Transmission Isolator Mount for GM
TKO, Magnum, 4-Speed and 700R4/4L60e.

DSUN-30004 3.5" .120 Aluminum Driveshaft, includes cryo treated slip yoke
and cryo solid u-joints, specify length, yoke type and u-joint size
when ordering
1 449.00 449.00
FWCH-10001 FWCH-10001, SCIENCE FRICTION Billet Steel Flywheel, SFI
Quality, 130t/10.5", Chrysler 6-bolt, Neutral Balance, Big Block,
318, 340 and CB 1972-73 6-Pack 440
229.00 229.00
BHCH-28073 BHCH-28073 - QT SFI Bell Housing, Chrysler Big Block/426
HEMI to Viper T-56, 130t fw only
539.00 539.00
CLCH-12203G SCIENCE FRICTION 107523C MEAN STREET STAGE 2
KEVLAR CLUTCH KIT, INCLUDES:
HIGH CLAMP LOAD LOW FLEX FORMED PRESSURE
PLATE,
23-SPLINE FULL FACE KEVLAR SPRUNG HUB DISC,
STAINLESS PILOT BEARING,
ALIGNMENT TOOL,
535 FT-LB RATED,
LIGHT

FSGM-10001 #910 GM/Mopar Pressure Plate Bolt, Set of 6, Race Grade 8 18.00 18.00
FSGM-10002 #912 CHEVY/MOPAR/FORD FLYWHEEL BOLT, SET OF 6,
Race Grade 8
15.00 15.00
Subtotal ------->> 1,699.00
Discount WD WD Discount for American Powertrain dealers: (Speedway) -175.00 -175.00
Shipping Shipping and Handling 75.00 75.00
Page 3
$

[moparstuart]

 Tony is the man and also shipped the stuff i'm buying from him today also
 thanks tony



Cross member -with mounting hardware
Hydraulic Master Cylinder Mount -
Line set and fitting - Earls -
Tilton Master Cylinder -
Includes all the reservoir options shown.




Tony Edler
Illumin8s
Phone: (573) 823-1813
See illumin8s on the web at www.globaloverdrive.com

[moparstuart]

 actually got the stuff today from tony

[moparstuart]

 

[moparstuart]

 

[moparstuart]

 

[moparstuart]

my used clutch pedals camein today

[moparstuart]

first shipment from american power train came also   clutch , pressure plate , tranny mount and hardware came
kevlar clutch disc

[moparstuart]

 

[ACUDANUT]

 Is Scott doing all the fun modifications and install ?
What did your convertible have in it ? 727 ?

[moparstuart]

Is Scott doing all the fun modifications and install ?
What did your convertible have in it ? 727 ?

yes 727 and scott has the plasma cutter and welder so we are doing the install in his garage in gardner 

[mhinders]

Randy in Indiana has installed a 6-speed in his turbocharged 67 Charger, page 46 in the magazine below.
http://www.moparaction.com/Next/history/april2012.html

He's usually active in this forum, not sure if you can see it, search for Randy (Barrett)
http://autos.groups.yahoo.com/group/66_67_dodge_chargers/messages

[ACUDANUT]

Stu, let me know when you are going to start this. I live really close and will come over and drink beer and watch.

[Supercharged Riot]

Ohh man. You gotta keep me posted on this.
I am very interested in doing the same thing!

[A383Wing]

Stu, let me know when you are going to start this. I live really close and will come over and drink beer and watch.

just sit there in the overstuffed chair with beer & video camera

Bryan

[JB400]

We all need to go over and watch.  Maybe, Stu will have the Hooters girls do the catering

[A383Wing]

I highly doubt any work would get done if they were there

Bryan

[JB400]

Who mentioned anything about work

[moparstuart]

i will keep updating as we go
i will let you know dates and times and if scott allows visitors    i'm sure visitors must bring a liquid donation or fee free to donate to the
superbird tranny fund   

[moparstuart]

dakota roller pilot bearing 10.00 from mopar 

[moparstuart]

got the pedals cleaned up and primed today