News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Disc brake proportioning valve

Started by Paul 500, February 04, 2006, 05:59:18 AM

Previous topic - Next topic

BlueSS454

Do you have a pic of this valve that you could post or send to me?  I would just like to put the correct lines and whatnot on the car so I don't have to go altering lines and rearranging them to make them work.
Tom Rightler

Ghoste

I think there may be more than one style of the proportioning valve too but I'm not certain.  As to the mounting location, I wonder if it depends on which assembly plant the car was made at or if it was at the discretion of the assembly line worker as to where the valve was located?

Shakey

The pic below is of a '69 Charger master cylinder, metering valve and proportioning valve.  They came from a '69 SE.  The pics a few posts above is of them still mounted on the car, just below the firewall on the driver's side.

I don't have a pic of the '67 one I have, it does look slightly different which is why I picked up the set off of the '69.