News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

69 Door moulding/Trim

Started by freddyd02, March 19, 2012, 09:04:53 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

freddyd02

March 19, 2012, 09:04:53 PM
Hey guys does any company out there reproduce the door trim??  :shruggy:  :-\

bill440rt

#1
March 21, 2012, 07:13:16 AM
As far as I am aware, no.
"Strive for perfection in everything. Take the best that exists and make it better. If it doesn't exist, create it. Accept nothing nearly right or good enough." Sir Henry Rolls Royce

twodko

#2
March 21, 2012, 11:15:59 AM
I'm not sure either except to surf eRape and other early gens Mopar forums. I had a couple dings in my drivers side belt molding and was able to work them out. The trim polished up nicely too. If you're in NorCal some where I could take a look at it......maybe help you get it repaired.  :shruggy:
FLY NAVY/Marine Corps or take the bus!

Patronus

#3
March 21, 2012, 10:39:53 PM
nope  :-\
'73 Cuda 340 5spd RMS
'69 Charger 383 "Luci"
'08 CRF 450r
'12.5 450SX FE

1969chargerrtse

#4
March 25, 2012, 10:54:31 AM
Quote from: twodko on March 21, 2012, 11:15:59 AM
I'm not sure either except to surf eRape and other early gens Mopar forums. I had a couple dings in my drivers side belt molding and was able to work them out. The trim polished up nicely too. If you're in NorCal some where I could take a look at it......maybe help you get it repaired.  :shruggy:
Ha!  eRape
This car was sold many years ago to somebody in Wisconsin. I now am retired and living in Florida.
Print
Go Up Pages1
User actions