News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

6 pack/engine questions

Started by poppa, December 17, 2011, 03:24:13 PM

Previous topic - Next topic

poppa

Hey all, going to try a six pack set up. Hopefully something like this - 512 or 528 stroker,stealth heads ,4  speed w/3.55 or 3.23,headers and a cam(something comparable with a comp xe284h.Kind fo general but... Questions are what would be a good starting point for the jets? And the squirters? Squirters were missing (one had a 25) and the jets in there are 81 in one outboard and 82 in the other,I haven't gotten to the center carb yet. This is not a factor 6 pack. Any info/help would be greatly appreciated. Thanks
God must love stupid people....he made a sh**load of 'em....

Matco tools...guaranteed for a lifetime. Just not a human lifetime.

Chryco Psycho

center carb should be 64 , squirter i would start with 28 power valve I would install a 4.5

poppa

Mine don't have a power valve. At least not the out boards...
God must love stupid people....he made a sh**load of 'em....

Matco tools...guaranteed for a lifetime. Just not a human lifetime.

poppa

Center has power valve. Only numbers I see are H4 and 05.
God must love stupid people....he made a sh**load of 'em....

Matco tools...guaranteed for a lifetime. Just not a human lifetime.

b5blue


poppa

God must love stupid people....he made a sh**load of 'em....

Matco tools...guaranteed for a lifetime. Just not a human lifetime.

Chryco Psycho

there should be a 4.5 , 5.0 ,6.5 or similar stamped on it , if it doesn't move smoothly it needs replacing

poppa

Only stampings I see are listed above. It does not stick.
God must love stupid people....he made a sh**load of 'em....

Matco tools...guaranteed for a lifetime. Just not a human lifetime.

charger Downunder

Quote from: poppa on December 18, 2011, 01:50:12 PM
Center has power valve. Only numbers I see are H4 and 05.
looks like you have a 4.5 power valve
[/quote]

poppa

Thanks guys....and Merry Christmas.
God must love stupid people....he made a sh**load of 'em....

Matco tools...guaranteed for a lifetime. Just not a human lifetime.

poppa

Would all squirters be the same size?
God must love stupid people....he made a sh**load of 'em....

Matco tools...guaranteed for a lifetime. Just not a human lifetime.

Chryco Psycho

usually a bit bigger on the outboards maybe 27 in the center carb & 31 in the outboards

poppa

God must love stupid people....he made a sh**load of 'em....

Matco tools...guaranteed for a lifetime. Just not a human lifetime.

Bigtree

Buy a Factory Sevice manual...set the carbs to factory specs..tune from there:
Center carb #63-65 jets
Shooter#31
power valve #6.5
Frontcarb.
#35 plate
driver.089-pass.089
Rearcarb
#34 plate
driver.093-pass.086
yellow springs

More barrels= more tuning options