OK HOW THE H#11 DO I GET THESE OFF!!!!!!!!!

[73dodge]

Sorry for the blurry pics but this is a door for my charger and I want to take the door latch mechanism off it is attached by 3 screws circled in red. I have flooded them with PB blaster and busted a screw driver bit already. They are just 3 screws right or do they have bolts behind the screws.

What should I do to get these off?

[sharpspike]

buy one of these impact drivers, you put the bit in the screw, turn then hit the end of the driver ( the impact ) with a hammer.  should be able to find one at auto or tool supply store

http://cgi.ebay.com/ebaymotors/Heavy-high-quality-chrome-IMPACT-DRIVER-Brand-New_W0QQcmdZViewItemQQcategoryZ35000QQitemZ4605958418QQrdZ1

[73dodge]

thanks i'll go look for one tomorrow

[The Ghoul]

you will love that tool!!!
saved my ars meny of times!!

[jaak]

I bought a cheap one 5-10 bucks, and I can't believe I went so long without one, don't use it alot, but sure is handy when you need it.


Jason

[hemihead]

I have a Craftman Impact Driver that I can use 1/2 Dr. sockets on too . I love that thing.

[73dodge]

went and picked up the impact driver, they came off but I may have pushed the metal in near one of the screw holes. Now I have to get in there and push the metal out. But the screws are out. Thanks for the advice guys