News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Attaching bumper guards on a 67?

Started by Ghoste, September 18, 2011, 05:39:40 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Ghoste

September 18, 2011, 05:39:40 PM
I want to put the bumper guards back on my 67, is there any special hardware involved in this?  They were off when I got the car and I am assuming I just pull out the bumper bolt that is in there and bolt through from the other side into the guard.  Is that about it?

mauve66

#1
September 18, 2011, 06:02:39 PM
sorry, mine are wrapped up in storage, can't remember
Robert-Las Vegas, NV

NEEDS:
body work
paint - mauve and black
powder coat wheels - mauve and black
total wiring
PW
PDLKS
Tint
trim
engine - 520/540, eddy heads, 6pak
alignment

A383Wing

#2
September 18, 2011, 06:30:43 PM
yup..remove bolt, install guard in place of bolt that was removed

Ghoste

#3
September 18, 2011, 06:37:17 PM
No special bolt or washer or anything required from the other side then?  (other than the correct size obviously)

A383Wing

#4
September 18, 2011, 06:40:41 PM
the bolt that goes into the guard goes through the hole to hold guard on

that's about it....nuthin' special
Print
Go Up Pages1
User actions