News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Rear Shock mounting pad

Started by flashley18, January 16, 2006, 09:25:21 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

flashley18

January 16, 2006, 09:25:21 AM
In the process of removing the rear suspension and axle I broke of the stud for the lower passenger side shock mount.  Where can I get a new pad or can this one be repaired??

Just 6T9 CHGR

#1
January 16, 2006, 10:51:07 AM
Mancini Racing has them new or you can find them on ebay all the time.......

http://store.yahoo.com/chucker54/respshmopl.html
Chris' '69 Charger R/T

flashley18

#2
January 16, 2006, 09:16:37 PM
I did not think they would be that high.  I guess I'll check E-Bay.  Can't believe I broke it.  Thanks for the reply.

Chryco Psycho

#3
January 17, 2006, 01:31:11 AM
Mopar has them too

flashley18

#4
January 19, 2006, 02:24:37 PM
Thanks -

I'll check with the dealership.

Chryco Psycho

#5
January 20, 2006, 02:21:37 AM
P4876518 R
P4876519 L

firefighter3931

#6
January 20, 2006, 11:36:24 AM
You don't have to replace the entire mount. The old stud can be cut off and a new stud installed in it's place. Magnum hp carries these for $14.99 ea. See link

Ron


http://www.magnumhp.com/drivesusp.php#
68 Charger R/T "Black Pig" Street/Strip bruiser, 70 Charger R/T 440-6bbl Cruiser. Firecore ignition  authorized dealer ; contact me with your needs

Shakey

#7
February 19, 2006, 11:32:13 AM
Quote from: Chryco Psycho on January 20, 2006, 02:21:37 AM
P4876518 R
P4876519 L

Do you know if these come with the studs?

Chryco Psycho

#8
February 19, 2006, 11:55:06 PM
they do not show the studs in the pictures , possibly the studs are included .......or not

Shakey

#9
February 20, 2006, 07:20:26 AM
I noticed that the ones from the factory way back when came with studs welded in place.  I'd like to find those.  Any ideas other than Mitchell Motor Part$?

Chryco Psycho

#10
February 20, 2006, 10:23:53 PM
wreckers ?
the factory was welded in place

Shakey

#11
February 21, 2006, 07:06:49 AM
Quote from: Chryco Psycho on February 20, 2006, 10:23:53 PM
wreckers ?
the factory was welded in place

That was my next step.

I have one good one and one where the stud has either rusted or broke.  Ultimately I would have like to have exact replacments but no such luck.  I am heading out Wednesday to pick up a set from a somewhat local yard.

It turns out I need a new spring seat also as it looks as though some salt had been sitting in there for a number of years.  I know I can buy replacements but I'll pick up the housing and switch everything over as the metal may be "soft" from rust around the seat.

I was quoted $150.00 CDN for a 8 3/4 housing and $50.00 CDN for a pair of shock mounting plates.  He might even have the proper Bendix brake booster for me.  That would be a bonus.

I'll post some pics when I pick these things up and get them home.
Print
Go Up Pages1
User actions