Dana 60 Car Rearend Whats stock width for B/E Body

[DodgeChargerNeeded]

Ok I picked up a Dana 60 Car rearend today. I am trying to figure out if it has been cut down. It was removed from a 69 Camaro. How exactly do you measure it and what should those measurements be. It has 5.38 Gears and complete disc brake setup with braided brake lines.  I will post pics in a few

[DodgeChargerNeeded]

pics

[heyoldguy]

1970-1974 E-Body Track width (hub face to hub face) 60.7", Spring pad  center to center is 46.0"

1971-1976 B-Body Track Width is 62.0" and Spring Pad width is 47.3"

1962-1970 B-Body Track Width is 59.2" and Spring Pad width is 44.0"

[71gtx]

"dana 60rear end widths, drum-to-drum:
66-'67= 59 1/2"
'68-'70= 60 1/8"
'71-'72= 63"

flange-to-flange 66-69 B-body 54-15/16" 70 B-body 54-29/32"
71-74 B-body 57-47/64"  :icon_smile_

[John_Kunkel]

Drum-to-drum widths and housing widths are the same for the Dana 60 and the 8 3/4".

[DodgeChargerNeeded]

I think the rearend has been slightly cut down then. It measures 51" from the end of the axle tube.