News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

NEED HELP WITH IGNITION PROBLEM ON MY 83 DODGE RAM

Started by BLACKWOLF, April 29, 2011, 10:53:07 PM

Previous topic - Next topic

BLACKWOLF

MY 83 DODGE RAM QUIT ON ME. IT WILL ONLY RUN AS LONG AS THE THE STARTER IS RUNNING. IF I TURN THE KEY BACK TO RUN IT DIES. I HAVE CHANGED THE IGNITION SWITCH ON THE COLUMN AND THE STARTER RELAY ON FRAME RAIL. THIS HAPPENED AFTER I DROVE THROUGH ABOUT 6 INCHES OF WATER. ANY HELP WOULD BE APPRECIATED. :flame:
LINNY SMITH 73' CHARGER OWNER HPAC MEMBER NATIONAL STREET MACHINE CLUB LIFE MEMBER
I'M ON FACEBOOK

John_Kunkel



Try a new ballast resistor.

BTW, no need to shout.
Pardon me but my karma just ran over your dogma.

BLACKWOLF

THANK YOU JOHN, SORRY ABOUT THE CAPS. I EVEN WRITE IN CAPS. LOL! FOUND THAT THE SPRING INSIDE OF MY BALLAST WAS BROKEN.
LINNY SMITH 73' CHARGER OWNER HPAC MEMBER NATIONAL STREET MACHINE CLUB LIFE MEMBER
I'M ON FACEBOOK