News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

1968 1969 dodge charger headlight vacuum lines

Started by lukendan, April 27, 2011, 07:46:06 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

lukendan

April 27, 2011, 07:46:06 PM
Can anyone please tell me the diameter and length of the vacuum hose from the engine to the canister for the headlights. I believe this one is larger in diameter then the ones on the harness that goes from the headlight switch forward

lukendan

#1
April 28, 2011, 10:04:05 PM
Turns out it is a quarter inch

elacruze

#2
April 29, 2011, 08:17:33 AM
I just looked at mine yesterday but forgot to get a photo. The nipples on the vacuum canister are both the same size, although one of the hoses with the yellow tracer looks slightly larger in outside diameter. Both are the same inside, about 1/8".
1968 505" EFI 4-speed
1968 D200 Camper Special, 318/2bbl/4spd/4.10
---
Torque converters are for construction equipment.

440

#3
April 29, 2011, 08:55:50 PM
Is the firewall grommet for these lines available ?

ChargerRT69

#4
December 18, 2016, 03:03:48 PM
Quote from: 440 on April 29, 2011, 08:55:50 PM
Is the firewall grommet for these lines available ?

Did you ever find a firewall grommet for the vacuum lines?

Mopar Nut

#5
December 18, 2016, 03:11:21 PM
Quote from: ChargerRT69 on December 18, 2016, 03:03:48 PM
Quote from: 440 on April 29, 2011, 08:55:50 PM
Is the firewall grommet for these lines available ?

Did you ever find a firewall grommet for the vacuum lines?
I know this is a old thread, but Stephens Performance has them.
"Dear God, my prayer for 2024 is a fat bank account and a thin body. Please don't mix these up like you did the last ten years."
Print
Go Up Pages1
User actions