Big bouncy boobs!

[b5blue]

BOOBIES!!!    OK, Now that were all happy, Mancini sells a reinforcement bracket for the axle housing that would help. You will want to cut a V grove along the split and build up the area with a few layers of weld. (Notice how I avoided using the terms "stiffener & crack")      

[mikepmcs]

Christina Lucci.

[greasyspider]

Thanks guys, and your welcome!  I was kinda hoping for an invisible fix as the rear end is original to the car.

[nvrbdn]

the fix could be mostly invisible if you groove it and weld properly. after welding grind it smooth. the weld on there was more like a surface weld that didnt penetrate. with a proper weld it will go all the way through the case.

[maxwellwedge]

BOOBIES!!!    OK, Now that were all happy, Mancini sells a reinforcement bracket for the axle housing that would help. You will want to cut a V grove along the split and build up the area with a few layers of weld. (Notice how I avoided using the terms "stiffener & crack")      

 That was a Hoot(er)

Thanks for keeping us abreast of the situation.....BRAvo.

It was like a trip down mammory lane.

Some may have been UDDERly disgusted but I am ok with it.

Tat!

[elacruze]

the fix could be mostly invisible if you groove it and weld properly. after welding grind it smooth. the weld on there was more like a surface weld that didnt penetrate. with a proper weld it will go all the way through the case.

If it adds considerable value to the car, the repair can be made inside and out, and dress/finish the outside. Still, the reason it cracked to begin with needs to be addressed-if the car is raced or abused with sticky tires it may come back again no matter what. Was the car ever in an accident?

[b5blue]

Tat...as in "tit for tat"....what is "tat" and where can I get some!   

[oldcarnut]

Tat...as in "tit for tat"....what is "tat" and where can I get some!   

You can get a tat for your tit like this one but it might hurt just a little

[Wicked72]

I was disappointed at first but you guys fixed the post! I love you guys!!!

[oldgold69]

 grind it out  heat it with a torch   then fill it  full   oh yeah  to the housing too