News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Can someone get me pics of... **UPDATE** now i have a bracket question, help!

Started by TruckDriver, December 30, 2005, 12:03:58 AM

Previous topic - Next topic

TruckDriver

The driver side of a 400 4bbl without the air cleaner? I want big pics so I can see where all the linkage & etc. goes for the carb. I got a lot of pics, but all have the air cleaner on and it hides what I really need right now. Thanks.
PETE

My Dad taught me about TIME TRAVEL.
"If you don't straighten up, I'm going to knock you into the middle of next week!" :P

Nacho-RT74

here is my assembly... It could be some differnet from earlier years since on 74 the kickdown linkage is seted at the tranny end and not at the carb end

-where is attached the return throtle spring at A/C bracket
-Top View.
-rear view
-front of carb view
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

Nacho-RT74

and the tipical view
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

TruckDriver

Thanks Nacho, exactly what I needed, thanks! But now I have a question. How am I going to attach a spring to the front of the intake with out the air compresser bracket? Or is there a seperate bracket I can get? Either way, I'm going to need one real soon. I wanna get my car running in the next 8 weeks or so.   Anyone???
PETE

My Dad taught me about TIME TRAVEL.
"If you don't straighten up, I'm going to knock you into the middle of next week!" :P

Chryco Psycho

there is a front bracket that bolts down with the front intake bolt to hook to springs onto

Nacho-RT74

Quote from: DodgeChargerGuy on December 30, 2005, 09:29:06 PM
How am I going to attach a spring to the front of the intake with out the air compresser bracket? Or is there a seperate bracket I can get?

Yes there is a separate bracket to non A/C Cars that attachs on first bolt of intake and is a diagonal one toward to front... sorry I can't help on that about pics, but sure someone will do
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

TruckDriver

PETE

My Dad taught me about TIME TRAVEL.
"If you don't straighten up, I'm going to knock you into the middle of next week!" :P

73ChargerSE

What I did, I got a wire loom from my 400, cut/grinded the plastic off so it would just be metal.  It fight right on the bolt for the battery cable, and you just tighten it down.  There is a hole in the wire look from where it was put on the block, and that's what you put your throttle return spring on.  It works, and kinda looks like it is supposed to be there.  It can be temporary until you find the bracket.

original72

summit part.... $6... can also be bought from any auto parts store or speed shop for around $10

SUM-G1339

TruckDriver

PETE

My Dad taught me about TIME TRAVEL.
"If you don't straighten up, I'm going to knock you into the middle of next week!" :P