torshion bar tool

[david hunt]

 Hi moparites, I need to know where to buy or make a hammer tool for removing stuck torshion bars. Auto zone does not know WHAT IT IS. Napa has no clue. I must be getting old as I remember seeing one some where. Thanks  to all mopar builders out there David Hunt

[b5blue]

Torsion Bar removal tool....Mancini Racing. 

[Ghoste]

I thought one of the suspension suppliers that advertise in the Mopar magazines all the time sold them as well but I can't seem to find it now?

[mikepmcs]

http://www.dodgecharger.com/forum/index.php/topic,60946.0.html

Not very high reviews from one member on the one that mancini sells.

Dodge Don made his own.

some other threads to read

http://www.dodgecharger.com/forum/index.php/topic,37057.0.html
http://www.dodgecharger.com/forum/index.php/topic,28827.0.html
http://www.dodgecharger.com/forum/index.php/topic,10659.0.html
http://www.dodgecharger.com/forum/index.php/topic,15096.0.html

[CDN72SE]

I was unsuccessful at trying to make my own so I bought mine from eBay, worked great:
http://cgi.ebay.com/ebaymotors/mopar-torsion-bar-tool-hemi-cuda-duster-charger-dodge-_W0QQcmdZViewItemQQhashZitem5d22604363QQitemZ400008692579QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

[oldcarnut]

Here's one I made as another idea.  Not too hard to do.

  http://www.dodgecharger.com/forum/index.php/topic,64434.0.html 

 Just scroll to the end.
David

[bull]

I pulled a total redneck and used some Jerry-rigged U-bolt clamps on mine; something similar to muffler clamps. The task ruined the clamps but it did the job... barely. And it was free. I hate spending $40 on something I might use three times in my life.