exhaust manifold bolts for hp manifolds.. who sells them?

[RD]

need a complete set for my manifolds and dont want to search the internet all day.. hoping for one shot one kill approach.. thanks in advance.

jamey

[bull]

http://www.megapartsusa.com/proddetail.asp?prod=MP%2DEMHK101

I almost got these: http://www.megapartsusa.com/proddetail.asp?prod=112%2DRB8
http://www.megapartsusa.com/proddetail.asp?prod=112%2DRB7

But it actually costs more than the kit and you still wouldn't have the nuts you'll need. And I hear you really don't want stainless.

[General_01]

You could get them at Mancini's.

http://chucker54.stores.yahoo.net/oemexmastnu.html

[charge-it]

We have them in stock and ready to ship.
http://www.pepsparts.com/products.asp?cat=5

[maxwellwedge]

Don't know if any of the above are sleeve nuts are drilled and tapped (correct). I do know Frank Badalson has the correct ones for sure.

[bull]

Don't know if any of the above are sleeve nuts are drilled and tapped (correct). I do know Frank Badalson has the correct ones for sure.

I would imagine so. The ones from Megaparts are at least and there's probably only one place making them.

[maxwellwedge]

Good to hear theirs are Bull - But there are non-drilled and tapped ones out there for sure.

[bull]

Good to hear theirs are Bull - But there are non-drilled and tapped ones out there for sure.

Really? That's goofy.

[69rtse4spd]

http://www.megapartsusa.com/proddetail.asp?prod=MP%2DEMHK101

I almost got these: http://www.megapartsusa.com/proddetail.asp?prod=112%2DRB8
http://www.megapartsusa.com/proddetail.asp?prod=112%2DRB7

But it actually costs more than the kit and you still wouldn't have the nuts you'll need. And I hear you really don't want stainless.

Why not stainless, I made a set out of s.s. for a buddy of mine, drilled & tapped & he said they worked fine. As long as you use high temp, high nickel antisize you should be fine. .   

[maxwellwedge]

Good to hear theirs are Bull - But there are non-drilled and tapped ones out there for sure.

Really? That's goofy.

Yeah - I remember they were the only kind Y-O was selling a few years ago.

[bull]

http://www.megapartsusa.com/proddetail.asp?prod=MP%2DEMHK101

I almost got these: http://www.megapartsusa.com/proddetail.asp?prod=112%2DRB8
http://www.megapartsusa.com/proddetail.asp?prod=112%2DRB7

But it actually costs more than the kit and you still wouldn't have the nuts you'll need. And I hear you really don't want stainless.

Why not stainless, I made a set out of s.s. for a buddy of mine, drilled & tapped & he said they worked fine. As long as you use high temp, high nickel antisize you should be fine. .  

I was afraid someone was going to ask me why not stainless. I don't recall right now but I remember Chryco saying it in another thread. I'll try to find it. Maybe he was talking about problems with dissimilar metals such as stainless nuts on plain steel studs. Also, I have to wonder about the nickel anti-sieze lasting that long. I know it's good to something like 2,400-degrees but probably not for say, ten years. Maybe. I don't know.

[A383Wing]

I have always used the "copper" anti-seize....never any problems

[RD]

awesome thanks for everything!  charge it.. expect an order within the next two weeks

[ACUDANUT]

 Hardens Muscle Car World. Lexington Mo. HPAC Members 

[charge-it]

We also sell the drilled and tapped long barrel nuts as a seperate item. http://pepsparts.com/proddetail.asp?prod=1000031
These of course are in stock and ready to ship.