News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Master cylinder variation

Started by Dmichels, July 02, 2010, 07:14:39 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Dmichels

July 02, 2010, 07:14:39 PM
Car is a 68 charger My old master has a wire bail that holds the lid on The new rebuilt master I got has a lid held on with a clamp and a bolt. don't care about correct year just want to make sure its the right part
Thanks Dave
68 440 4 speed 4.10

Chatt69chgr

#1
July 02, 2010, 08:41:51 PM
All drum or disc brakes?  Power booster or not?

Dmichels

#2
July 02, 2010, 08:47:14 PM
car is power drum brake
Thanks
68 440 4 speed 4.10

squeakfinder

#3
July 02, 2010, 08:53:41 PM
 

   I don't think it matters. My power drum brake 68 had a bolt and clamp when I got the car. Last tme it was licenced was 1982. The replacement master was a wire type. It works fine.
Still looking for 15x7 Appliance slotted mags.....

Just 6T9 CHGR

#4
July 02, 2010, 09:25:58 PM
Should have the bolt thru center type...
Chris' '69 Charger R/T

Dmichels

#5
July 03, 2010, 09:05:06 AM
Ok just checked in the shop manual and it showes the bolt threw the middle type I just did not want to have any problems in 3 months when I am putting the car back together andd the parts store does not want to take a return.
68 440 4 speed 4.10
Print
Go Up Pages1
User actions