News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

1/4 panel to rocker panel joint?

Started by lexxman, April 05, 2010, 06:47:52 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

lexxman

April 05, 2010, 06:47:52 PM
Hey guy I could use a Little help on this one,I'm at the point where I 'm doing the area where the rocker meets the 1/4 panel.And I don't know what it should look like before and after filling. It looks like there should Be a little more to it. I still have to clean it up, but a bit of help would be great.

jerry

#1
April 05, 2010, 07:53:05 PM
it was lead joint at factory with body filler over that.

BlueSS454

#2
April 05, 2010, 10:03:10 PM
I fabbed up a piece to fix the gap and welded it in so it was flush metal from the rocker to the 1/4 then put a swipe of filler over it.
Tom Rightler

lexxman

#3
April 05, 2010, 10:08:36 PM
Quote from: BlueSS454 on April 05, 2010, 10:03:10 PM
I fabbed up a piece to fix the gap and welded it in so it was flush metal from the rocker to the 1/4 then put a swipe of filler over it.
That what I was thinking,so it should be smooth when finished?There's no line or anything? I already cleaned the old lead from the passager side.
Print
Go Up Pages1
User actions