News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Tire question on Cragars

Started by 451-74Charger, April 05, 2010, 12:00:29 PM

Previous topic - Next topic

451-74Charger

Just Bought a set of 4 15x10 Cragars for my Charger.
What tire would fit the arches without binding, or did I go too wide?

Nacho-RT74

I think too wide in front depending on tires height and backspacing... rear, needs to consider the backspacing... I think the deeper it was not more than 4 1/4". Or it was 4 1/2" ?... will need to search the thread about. Was already measured
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

HPP

I don't think 10" is too wide, but I do believe the backspace on the cragars is going to mess with ya. Your going to need something around 5 to 5.25 in back to make them fit right and those cragars only come with 4.25 or 4.5. I don't think you can get those 10" rims under the front at all with that backspace.

Smokey Bear

If you are running a 73-74 with the higher cut fender the 10's just might work in front with a low profile tire. They will definitely not clear the fender lip, but if the car is high enough and tire low enough, it might work for that "Hotwheels" look. The 10's wont work out back except with the same reasoning.