Pitman Arm - Mystery part identification

[snicker]

I'm trying to replace my Pitman arm in my 69 Dodge Charger but every standard part that I order that says it is for 69 does not fit because it bangs up against the header. I compared the part in my car that works against what parts I'm getting sent and there is an obvious difference. Can someone identify the part on the top? What year/make/model is that from?

The part on the bottom is the replacement that doesnt work. Image attached.

[tan top]

from memory , the top looks like the original part !!  correct one  , are you sure the bottom one even goes on the splines ok    as it looks like its  for the later larger spline box  & its got more than one indexing spline   
   

[snicker]

All the sources I have found are selling this new curved style one. HELP!

[HPP]

are you sure the bottom one even goes on the splines ok    as it looks like its  for the later larger spline box  & its got more than one indexing spline 

Agreed, the bottom has a larger hole for the splines and would not work for a small sector box. I'd verify that first.

[Chatt69chgr]

Check with Rare Parts, Inc.  They were the only ones selling the small sector pitman that fits a 69 charger at one time.  I think AutoZone handles their part.  The large sector pitman that fits later boxes is avail from MOOG.

[snicker]

Rare Parts doesn't have it and the one at an angle is the MOOG part that they say is for the 69 Charger. Here's another pic with the part numbers:

[snicker]

Researching the part number I came up with someone that found this part on a 72 Duster and someone seemed to think it was for a 73+ duster. Here's the thread link:

http://www.bigblockdart.com/index.php?PHPSESSID=bebf32c34151845dd1e45ec173a5d313&topic=41914.msg419138

Any ideas?