BULK HEAD PICTURES

[69chargerGenLEE]

So, how about some people with there chargers 68-69 post some close up clear pics of there bulkhead wires so we can see the colors in all the slots,, I have yet to see any pics up , and its one that should be up, even under that dash bulkhead part would be really cool and help to others trying to get certain things workin on there chargers !! So let see some pics !

                 

[UFO]

Your better off looking at a wiring diagram.
It's spaghetti and you will not see every wire.

[69chargerGenLEE]

Ive got all my stuff hooked up, I got every book and diagrams and know everything, but theres alota people out there who need help and we need some bulkhead pics in good restored cars !! PICS  are the best way to see them and your right diagrams are spagetti more reason we need pics, how hard it is to post some pics !!! We're  here to help each other right come on lets see some pics !!  PLEASE PLEASE Everyone !!
                         

[UFO]

If yours are all hooked up.Post some pics of your bulkhead connector.

[68r/t]

Maybe this might help you.   

[mike337]

Starting on reassembly of my engine compartment wiring, and the pic will help.

Thanx,
Mike

[maxwellwedge]

Maybe this might help you.    

The wire next to the vacuum hoses - is that for a 4-speed?

[tan top]

Maybe this might help you.    

The wire next to the vacuum hoses - is that for a 4-speed?

 looks like the tac wire to the minus side of the coil to me  
 although allthe ones i have seen / or noticed come through lower down   although i'm thinking thats the 69 only 

[69chargerGenLEE]

   Alright , Awsome,, the pic is sweet,,, Keep em coming guys,, its surely needed very much !!    Cheers

[maxwellwedge]

Maybe this might help you.    

The wire next to the vacuum hoses - is that for a 4-speed?

 looks like the tac wire to the minus side of the coil to me  
 although allthe ones i have seen / or noticed come through lower down  although i'm thinking thats the 69 only  

Here is my automatic 69. No grommet there....

[68r/t]

Maybe this might help you.    

The wire next to the vacuum hoses - is that for a 4-speed?

 looks like the tac wire to the minus side of the coil to me  
 although allthe ones i have seen / or noticed come through lower down  although i'm thinking thats the 69 only  

This car was optioned with cruise control so as far as I know the tac wire which  has the wrong grommet in this pic went through the upper hole as the "normal" tac wire hole is used for  the cruise wires.
I now  have the correct grommet for the tac wire and it dose not fit the normal hole for the tac as the hole is to big.
There is also a wire harness bracket  that is mounted underneath the  heater nut next to the solenoid, and I have not seen that one before either.

[Needa68]

Would you like to feel good about what your engine compartment looks like. This picture should do it for you. This is what ours looked like when we bought the car 3 years ago.

[68r/t]

Would you like to feel good about what your engine compartment looks like. This picture should do it for you. This is what ours looked like when we bought the car 3 years ago.

I think you may have had a oil leak,,,

[Needa68]

You're correct about the oil leak. Evidentially the car was driven for years with a bad oil leak. When we got it the engine had finally blown and then been let set for years. The interesting thing is all that oil preserved a lot of the sheet metal. Here is a picture of what that area of the firewall looks like today.