WIW ? is there a BELLHOUSING for the 1964 MAX WEDGE what is the part # ?

[rav440]

 

1964 Max Wedge stamped Steel bellhousing, almost indestructable,  near mint shape

what would it be worth ?  

thanks RANDY

[Ghoste]

I don't know what they would be worth but they did make one.

[John_Kunkel]

The original Max Wedge bellhousings were cast steel, not stamped steel; they will have the word "STEEL" in raised letters. These were two-piece with a cast steel lower cover.

The regular V8 bellhousings were cast iron with a stamped steel cover.

Since the original Max Wedge/Hemi bellhousings are no longer legal for racing they're strictly for restoration, I've seen them sell for over $500+.

[rav440]

what would be the part # on the bellhousing ?

thanks RANDY

[Ghoste]

For 1964 it is 2406043 and the casting number is 2406042.  The cover should be part number 2406045 and the casting number 2406044.  According to my info anyway.

[rav440]

i just got back from looking at the bellhousing . i didnt buy it becacuse it didnt look right to me . the casting / part # was vauge at best it looked like 240 or 8/3 6246 or 3 plus the center were the trans goes in had a smaller concave machined ring not just the typical 5" or 6" hole but it did have the embossed / raised  " STEEL " i just wan thrown by the #s and the hole .



thanks for the info