Need Hard Fuel Line From Pump To Carb

[bordin34]

I am in search of the fuel line that goes from the fuel pump to the carb. I currently have a 73 with a 400 and a 670cfm Holley Street Avenger. Is there any place I can buy a fuel line like this.

[68CoronetRT]

Bumping this thread because I have the same question. Except I'll have a 440 soon 

[moparguy01]

I've always just bent my own hard line. Get some straight sticks from the parts store, bent them up, add a single flair at the ends so the hose doesn't fall off, and viola. Done. and for a whole lot cheaper too.

[68CoronetRT]

I've always just bent my own hard line. Get some straight sticks from the parts store, bent them up, add a single flair at the ends so the hose doesn't fall off, and viola. Done. and for a whole lot cheaper too.

So run a small bit of hose to connect the pump to the hard line?

[moparguy01]

that's how I've done it, unless of course it is a high performance pump with 2 female ends, then just use one of the fittings from the parts store. when you buy the tubing its considered brake line and has 2 fittings on it. I've used them for years.

[68CoronetRT]

Awesome Thanks! Going to go with the 4845 pump and just do a small hose like you suggest to the hard line then up to a AN fitting for the carb feed.

[greenpigs]

Try this if you don't want the hassle of bending it yourself.

http://www.ebay.com/itm/68-69-70-71-MOPAR-FUEL-PUMP-CARB-CARBURETOR-LINE-LINES-440-4BBL-CARTER-AVS-OE-/161015205936?hash=item257d411030&item=161015205936&pt=Vintage_Car_Truck_Parts_Accessories&vxp=mtr

[firefighter3931]

There is a company called Fabulous Fabriations and can build you exactly what you want. Many members here have used his lines and they fit perfectly 


Ron