LCA question **PICS**

[runningman]

Are the sway bar tabs on the LCA's supposed to be nice and straight?  Mine are bent up but they both bent in the same way so I am not sure if this is the way they should be.  These are on a 68.........thanks!

Matt

[b5blue]

Hey Matt! My 70's are in a different location but do have a little angle thing going on...I think it's to help how the sway bar and LCA pivot 90 degrees to each other. _ l 

[runningman]

Neal,

Yeah, they have an angle on them as well.  The ends of both of them are bent up a little and one has a slight crack also, I will just straighten the ends out and weld the one up and should be good to go.  Thanks!

Matt

[b5blue]

Just set up my eBay LCA's with new Moog bushings and reinforcing plates to go with my new 440/Hemi MoPar torsion bars. Are you painting them "steel",black or simulated cosmoline (sp.?)? There is a thread on that subject here somewhere. I think I'm going with steel color or black.   

[runningman]

I have the reinforcement plates going on also, should have them welded in soon.  I am thinking of going with a gold-tone powder coat.  The more I see it the more I like it.  I am going to go with a satin black powdercoat on the UCA's though.

[b5blue]

SOUNDS SWEET, My old boy gets too dirty matter much.

[runningman]

Just got my parts back, here are some pics

[gasoline_24]

They look great.  Can you give me a manufaturer and color for the LCA?  I want to do the same for mine, but just couldn't decide on a  color for the powder coater.

[Just 6T9 CHGR]

My my those are purdy

[tan top]

   they look great 


should of done mine that goldish color  , instead of black after welding in the renforcements 

[runningman]

Thanks!  Here is the color I used for the lowers http://www.eastwoodco.com/shopping/product/detailmain.jsp?itemID=44&itemType=PRODUCT&iMainCat=844&iSubCat=847&iProductID=44

Just got back from the hockey game...Go Wings!!!!!

[b5blue]

Great! Good choice on color, looks high tech with the reinforcing plates! 

[69*F5*SE]

They look real nice Matt.  That gold on the lowers looks fantastic.   

Go Wings!   

[runningman]

Thanks guys!  Here are some pics from the game on Wed

[Shakey]

They do look good.

I also did mine in gold (paint) as I couldn't be bothered with the Cosmoline deal.

Well done.

[Shakey]

Thanks guys!  Here are some pics from the game on Wed

I like your suit but you need a tie clip to keep 'er straight.

[runningman]

Thanks guys!  Here are some pics from the game on Wed

I like your suit but you need a tie clip to keep 'er straight.

That's Mickey Redmond....after a few "pops" as he calls them

[bricklayer]

runningman/B5blue did you get the reinforcement plates from Moog or else where thanks  tom

[runningman]

I believe a number of places sell them but I got mine from Mancini since they are local.

[b5blue]

Mancini also. 20.00