News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Mystery emblem...what is this off of?

Started by AKcharger, June 29, 2008, 01:23:41 AM

Previous topic - Next topic

AKcharger

I found this emblem inside the bottom of my trunk extension today.  At first I thought "cool the original 400 magnum emblem" but then I quickly realized it's too small. I purchased some NOS emblems a few years ago and that's what's on the car now.
So the mystery...what are they off of? It is NOT the origianl one for the hood, it is way to small to match up with the original hjoles in the hood. It looks like it the same size as a the emblems on challanger/cuda side scoop but I don't recall that being an engine option ever for those cars. Road runners have decals and dusters/darts are out...any guess'?



UFO

Look on the back side for a part number.

WingCharger

Maybe it was an interior option? See if there are any filled in holes anywhere.

rav440

maybe from a 75 76 CHARGER or the MAGNUM or did they only have 360s  :shruggy:
1973 PLYMOUTH road runner GTX



superblu72

72 SE magnum cars had a smaller engine emblem on the fender. I know the 440 did anyhow. Not sure if  73-74 cars did the same or not. I have pics of one but they are 2 larger.

nakita7

That is strange. Been into 3rd gens for a long time, can't understand what that would be either?  :shruggy:

chgr500

Didn't the e bodies use a smaller hood callout emblem like that...I've seen 383 and 440 magnum ones that size on the hood... :popcrn:

RD

Quote from: chgr500 on June 29, 2008, 10:39:47 AM
Didn't the e bodies use a smaller hood callout emblem like that...I've seen 383 and 440 magnum ones that size on the hood... :popcrn:

exactly!!!!  you can find those on the challenger and cuda bulge style hoods.


67 Plymouth Barracuda, 69 Plymouth Barracuda, 73 Charger SE, 75 D100, 80 Sno-Commander

bill440rt

Quote from: chgr500 on June 29, 2008, 10:39:47 AM
Didn't the e bodies use a smaller hood callout emblem like that...I've seen 383 and 440 magnum ones that size on the hood... :popcrn:


Right, BUT, E-bodies never came with 400's.
It's probably for a Dodge pick-up truck, they sometimes had small hood emblems like that.
Just a guess...   :shruggy:
"Strive for perfection in everything. Take the best that exists and make it better. If it doesn't exist, create it. Accept nothing nearly right or good enough." Sir Henry Rolls Royce

nakita7


Alaskan_TA

A part number would help....

What flat hood B-Bodies came with the 400 Magnum? It may be a fender emblem?  :shruggy:

71ChallengeHer

My son had a 74 Satellite with a Roadrunner hood on it, from factory. It had a 400 Magnum in it and the emblems on the hood. I don't remember how big the emblems were. :shruggy:

AKcharger

Well no part # so that doesn't help, there are small indents for posts, perhaps they broke off or it was a glue on.
Now about a '74 Satalite/road runner did plymouth use the term "Magnum"?  I thought that was a dodge only thing

Ghoste

You are correct that Plymouth didn't use "Magnum" in any of their engine designations.  I am also very sure that Plymouth didn't use anything but decals for engine callouts on their B-body hoods from 71 to 74.

Alaskan_TA

Only think I can think of is a Charger SE with a flat hood.

I know I have seen the emblem on a car someplace.......

superblu72

Quote from: superblu72 on June 29, 2008, 09:13:17 AM
72 SE magnum cars had a smaller engine emblem on the fender. I know the 440 did anyhow. Not sure if  73-74 cars did the same or not. I have pics of one but they are 2 large.

REad Above. How do I post a pic that is over 200KB?

Ghoste

You need to resize it.  Check in the site suggestions area and I think there are better instructions for it there.

Alaskan_TA

If you do not have a re-sizer, email the photo to me and I can do it for you.

superblu72

Quote from: Alaskan_TA on June 29, 2008, 11:36:40 PM
If you do not have a re-sizer, email the photo to me and I can do it for you.

pics sent. Thanks!

BROCK

News flash:  E bodies never came with 400s?!  Sorry for the quick little hijack.  What could you get in 72 - 74 E bodies?

=============================================
Let your music be in transit to the world

Alaskan_TA

Awesome! Great photos Chris.  :cheers:

Anyone have a photo of one with the 400? 

superblu72


Alaskan_TA

Brock,
1971 was the last model year for a big block in an E-body.

Choices for 1972 were the 225, 318 or 340.

AKcharger

Hmmm well looks like mystery is solved...I have NEVER seen that before. Well you learn somin new every day.

Super blue I either take low pixel photo or load to photo bucket and link 'em

Nacho-RT74

I have seen couple locally, but never known about.
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html