Anyone know best way to get all brackets for a 440?

[dspaulding70]

I am swapping my 318 with a rebuilt 440 but it did not come with all of the brackets for a/c, alternator, etc.  Any ideas on how to locate these parts?  I have posted on the parts wanted page and also inquired at many salvage yards, etc.

I am running out of time because the block will be ready from the shop in about a week.  Any suggestions?

[Charger-Bodie]

Since its for an A/C car you will most likely be looking for used ......non A/C brackets are available new , but I havent seen much for A/C stuff.

[1969chargerrtse]

Ah, been there done that.  I got my alt brackets , bolts etc...  from 440 source.  The A/C bracket stuff took me forever.  Hot68 found me someone who had used brackets.  Hopefully he'll come back to this thread and post the name and number.  If you need pictures of the A/C pump and brackets, pm me as I still have them, I saved for people like you.

[Old Moparz]

I bought a condensor for my Scamp from Classic Auto Air years ago & would use them again. They sell complete kits to install A/C & offer brackets for the engine compartment.

http://www.classicautoair.com/BBody6872.asp

It might be worth looking to see if they have stock brackets too.

[oldcarnut]

Post or send me some pics of the brackets needed and I'll compare them to some of the stuff attached to old compressors I have laying in the garage and on shelves. Some are from dealer add-ons and other factory but pretty sure all are 383 or 440 engs. 
David

not mine but saw these and some others on the ebay.  http://cgi.ebay.com/ebaymotors/Mopar-440-Dodge-66-67-68-A-C-brackets-big-block-braces_W0QQitemZ310051603709QQihZ021QQcategoryZ140681QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

[1969chargerrtse]

Here they are.

[oldcarnut]

Did you get your brackets yet?

[daytonakid]

You might go after market on compressor and brackets. Each year and body sytle can use different brackets. Big block stuff is getting hard to find and is expensive. Bill

[Khyron]

where are you located? I have a condenser and all the brackets.... as well at the power steering pump and brackets. Let me know if you need to, I can go to the garage and take a bunch of pics... or if you are interested in purchasing them... let me know. I have no need for them.

when I spin the condenser it puts out some air and pressure. not 100% it works, but it's not locked up, it came from a 67 440. C motor.

[Khyron]

To also help, here are some more detailed pics.

Front with the rest of the mounting brackets for compress and Alternator


Back of the compressors mounts that go to the intake manifold.


Depending on the year motor... or maybe this is just for all AC, here is the power steering pump


Side view up pump



and video of mine moving.
http://www.speed-freekz.com/images/100_2057.MOV





Let me know if you need more detailed pics.

[oldcarnut]

If Khryons don't work for ya I have some others I pulled out I can shoot some pics of while I'm getting the early Charger parts taken to ready to ebay out.