Yet Another 440 Build

[71_U-Code_Charger]

Ok guys,

Here's the scoop...

440 bored 30 over
kb 237 pistons
516 heads, pocket ported gasket matched 2.14 int 1.81 ex valves
Comp ratio 11.5 to 1
mp 509 - 292 hyd cam and lifters
1.7 roller rockers
Eddy TM7 intake w/2 inch spacer
Holley\Proform 950 carb
Hooker Fenderwell 2 inch headers
MSD 6al
Moroso 7qt pan
High volume oil pump
Fully groved mains
File fit moly rings

How much HP and Torque do you guess/think? 

It's going in my 71 Duster
2800 stall
reverse valve body deep pan
430 sure grip narrowed 8 3/4 with moser axles
line lock
28 x 13 x 15 M/T DOT slicks
SS springs
pinoin snubber
approx 3300 lbs with me in it.

And how fast in 1/4?

[MoParMetal]

whoa dude!
you own a 71 duster too?
so do i!
but we're putting in a stroked 383.
almost the same setup.
a little more street friendly though.

im not too saavy on 1/4 mile stuff...

[Rolling_Thunder]

hmmmmm  -   without having head flow rates it is a little hard to guess accurately....     

I would guess around 550hp @ 6000   and  560tq @ 4500   

ET...    hmmmm    again pretty difficult without knowing how good of a driver you are....   I would say 10.60's