News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Question WRT front windsheild gasket?

Started by Back N Black, May 14, 2008, 06:58:27 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Back N Black

May 14, 2008, 06:58:27 PM
OK, i pulled my new gasket out of the packaging today because the glass guy is coming tomorrow to install the front windshield. Is there suppose to be a small strip of rubber that goes around the gasket to lock it in place?  All i have is the gasket. It is made by Precision inc. and part number WCRD715.

Thanks in advance.

Charger-Bodie

#1
May 14, 2008, 08:30:46 PM
The gasket locks to itself, there is not a seperate lock strip.

The type gasket  is called a zipper. :Twocents:
68 Charger R/t white with black v/t and red tailstripe. 440 4 speed ,black interior
68 383 auto with a/c and power windows. Now 440 4 speed jj1 gold black interior .
My Charger is a hybrid car, it burns gas and rubber............

bill440rt

#2
May 14, 2008, 08:36:57 PM
Yup, what Brian said.  :yesnod:

BnB, that's the same gasket I used when I had my windshield installed. The lock strip is an integral part of the gasket. Once the windshield is placed in the groove & seated around the gasket, one side simply folds into another. There is a little lip that holds the 2 halves together, a.k.a. the "lock strip".

Good Luck!  :2thumbs:
"Strive for perfection in everything. Take the best that exists and make it better. If it doesn't exist, create it. Accept nothing nearly right or good enough." Sir Henry Rolls Royce

Back N Black

#3
May 14, 2008, 08:50:49 PM
Cool, thanks guys.  :cheers:
Print
Go Up Pages1
User actions