News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

oversized tappets

Started by Nacho-RT74, March 18, 2008, 10:34:06 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Nacho-RT74

March 18, 2008, 10:34:06 PM
did anybody here need to use oversized tappets sometime ?
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

Challenger340

#1
March 18, 2008, 10:53:14 PM
30 yrs ago, not lately. More work to oversize the Lifter bore these days, now we just put a bushing in and use stock.

Whats the problem ?
Only wimps wear Bowties !

Nacho-RT74

#2
March 18, 2008, 11:47:02 PM
no, just out of curiosity... I'm fine, but never have seen an engine needing those, and read it on moparts catalog they were available :shruggy:
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html
Print
Go Up Pages1
User actions