March Serpentine Pulley Kits on a 440 - Any Experience or Suggestions?

[bill440rt]

Anyone out there have any suggestions for me?

I am looking to buy one of these serpentine pulley kits from March for a 440:

http://www.marchperf.com/pg46.html#chyserp2

Just wondering if anyone on here is using one of these, & if there are any issues with it? I've heard there were some problems in the past with the holes in the crank pulley for a HEMI, but are there any issues with the 440 kit??
Will it work with an aftermarket A/C compressor (Sanden, Classic Auto Air, etc.)??

Does anyone know if there are any clearance issues or compatibility problems with an aftermarket A/C kit? March is showing Sanden compressors for sale on their website, not sure if it needs to be mounted low (bottom) or not.

Here are the plans:
1) 440 6-pack: aftermarket A/C will clear OK
2) Classic Auto Air A/C: they offer a top mount bracket kit. I want to run a mechanical fuel pump vs electric.
3) Clutch fan: I don't want to run an electric if I don't have to. Will the March setup work with a stock-type clutch fan?

Supposedly, according to March there might be clearance issues up top with the March brackets & a stock 6-pack air cleaner. I prefer to use a stock 6-pack air cleaner. You have to use the March brackets with the March pulley setup, not the CAA brackets. The CAA brackets WILL clear a 6-pack air cleaner, but won't work with the March pulley setup.

The single belt March setup REQUIRES an electric fuel pump. I want to run a mechanical pump.

Any suggestions??? 

THANKS!!!

[mopar0166]

Definitely an old post, I didn't see any response to it though. 

That is going to be one of my winter projects, I want to upgrade to a serpentine belt pulley set and add aftermarket ac.   my car was originally ac and from I see these kits give me a lot stuff unneeded for an original ac car. 

who do people recommend for a new ac setup etc.  I believe marches new pulley setup comes with a compressor. 

[bill440rt]

After much research, I ended up getting one made by a member on Moparts. His ID is Duster499.
He makes them for all big block, HEMI, different configurations, etc. Best of all I was able to run a mechanical fuel pump with the A/C and a 6-pack air cleaner, and his kit didn't have that street rod look to it.
I ended up using an electric fan setup, though.

Some pics of it can be seen in this thread:
http://www.dodgecharger.com/forum/index.php/topic,62840.0.html