Ignition options for a 383... minus the "box"

[bull]

What's a good ignition system for use on a 383 without having to bolt a big box to my inner fender?

[firefighter3931]

What's a good ignition system for use on a 383 without having to bolt a big box to my inner fender?

Hide the box under the dash ! 



Ron

[bull]

What's a good ignition system for use on a 383 without having to bolt a big box to my inner fender?

Hide the box under the dash ! 



Ron

I did think of something similar to that but didn't know how/if it would work. So what's a good choice? MSD?

How about this deal: http://cgi.ebay.com/ebaymotors/Mopar-383-400-Electronic-Ignition-Conversion_W0QQcmdZViewItemQQcategoryZ33691QQihZ024QQitemZ370025652926QQrdZ1QQsspagenameZWDVW

Or this: http://cgi.ebay.com/ebaymotors/NOS-Mopar-383-400-electronic-ignition-kit-w-orange-box_W0QQcmdZViewItemQQcategoryZ33691QQihZ023QQitemZ360025670835QQrdZ1QQsspagenameZWDVW

[Rolling_Thunder]

Petronix unit   

[bull]

Petronix unit   

Yea? How come?

[chargerbr549]

You could use the GM Hei module with a 12vt coil heres a link,

http://www.dodgecharger.com/forum/index.php/topic,26210.0.html

[chargerbr549]

Here's another link,

http://www.dodgecharger.com/forum/index.php/topic,4197.0.html

[histoy]

I've put the Petronix units on a '64 Vette and a '68 Charger, and each time they worked fine.

[tecmopar]

I bought one of those RTR Pro-comp distributors from Mancinis for about $80 and so far its been fine. The "box" is built onto the side of it and it need nothing but 12 volts, no ECU, ballast resistor or extra wiring, only down side is the plug wire connectins are male HEI type so you'll need to change the ends on yours, good luck.