Paintball guns

[69bronzeT5]

Hey guys, I just got a paintball gun. I got CO2, got paintballs in the hopper, CO2 canister is hooked up, safety is off...and I cant get it to shoot? Any ideas?

[mally69]

Try pulling the trigger

[69bronzeT5]

Man, didnt know I had to do that!


I did, it wont shoot any balls out. I turn down the barrell and a ball falls out

[mally69]

make sure your co2 is full or screwed into the gun the whole way being pushed into the barrell   i know NOTHING about these thing so im just guessing

[69bronzeT5]

make sure your co2 is full or screwed into the gun the whole way being pushed into the barrell   i know NOTHING about these thing so im just guessing

done and done and nothing still. My uncle is coming over tomorrow, he paintballs

[bordin34]

Did you cock it after you screwed in the CO2, just pull back the "bolt" at the rear of the gun while the CO2 is in.

[69bronzeT5]

Did you cock it after you screwed in the CO2, just pull back the "bolt" at the rear of the gun while the CO2 is in.

Yep, I cocked it after the C02 was in and nothing. Well, like I said, my uncle is coming over tomorrow anyways, he paintballs alot.

[A383Wing]

Don't shoot yer foot off!

Bryan

[dukeboy_318]

Yeah what model did you get, be sure not to fire it under 40 degrees, you'll blow o-ring, also make sure that the tank is full as they dont come full from the store, make sure that if its an electronic one, the its turned on, theres a number of things that could be causing this.  post a pic when you get a chance also check to make sure the valve on the back of the gun is turn up enough to launch the balls

[400/6/PAC]

Try pulling the trigger

I'm sorry
I just couldn't help myself.

[BigBlackDodge]

You'll shoot your eye out kid!



BBD