News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

is this really upper ?

Started by Nacho-RT74, November 04, 2007, 01:11:13 PM

Previous topic - Next topic

Nacho-RT74

Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

Hot_Rodder

I'd say it woul be driver side inlet on the radiator, all mine have been passenger side inlets.

Some times I need to pay attention to what I type.... this has been modified a lot.... :-\ :rotz:

71superbee

Natcho, it does look like an upper hose to me , with the radiator side of the hose being on the driver's side

Nacho-RT74

as far I know NO ONE  73/74 ( and honestly neither earliers or laters ) had radiator top outlet on driver side, because would meet with A/C compressor... lower was on driver side on earliers, but not top... still think it could be lower to passenger side because the U shape... tops are all L shaped. U shape would meet with fan blades
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

firefighter3516

Well I cant tell you about the radiator hose. But according to my big block book the radiator outlet is on the passenger side for all big block. Dont know if that helps or not. But I am looking around for you. :rotz:
1998 Dakota 318
1999 2500 Cummins
1973 Charger (in bad shape but working on it)
www.myspace.com/73dodgecharger

70charger_boy

Nacho,I went to autozone to buy a upper radiator hose for my 70 charger 318 with A/C and they gave me the hose that you have pictured.  It didn't fit my car.  I have a drivers side inlet and it was 3 inches too short, but I was able to use it as a lower.