News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Sherman and/or Goodmark Body parts wholesale

Started by Chatt69chgr, September 04, 2007, 10:42:53 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Chatt69chgr

September 04, 2007, 10:42:53 PM
Does anyone know if you can buy the parts that sherman lists on their website any cheaper than they what they list them?  Thanks.

moparguy01

#1
September 04, 2007, 10:59:08 PM
usually its more expensive than the prices they list, since you have to go through a sherman dealer. they dont sell to individuals.

BlueSS454

#2
September 04, 2007, 11:05:43 PM
I know of 2 Sherman metal dealers.  Year One, and Auto Body Specialties in Middletown, CT.  I got most of the Sherman pieces I needed from Auto Body Specialties at the Englishtown swap meet so I didn't have to pay outrageous shipping charges.  I got one piece from Year One 9rear floor pan section).  Also FWIW, the Sherman pieces I used fit like a glove.
Tom Rightler

hemi-hampton

#3
September 04, 2007, 11:24:04 PM
Sherman does sell to Individuals or any Joe Smoe off the street that wants to Walk in. I know, I do it all the time since I only live a few miles away from them. If you have a Business or body shop you can register that name with them to get a discount. LEON. :pity:

Hemidog

#4
September 05, 2007, 04:44:53 AM

Hemidog

#5
September 05, 2007, 04:45:36 AM
btw, stay away from the rocker panels! they are total junk!

Chatt69chgr

#6
September 05, 2007, 10:09:03 AM
Good to know about registering with Sherman.  Maybe my garage license will come in handy.  I am interested in the transmission tunnel (4-speed hump), left inner fender panel (battery acid ate mine up) and the left and right trunk floor pans.  Has anyone had bad experiences with these parts?  Fortunately, I don't need rockers but I appreciate the tip on these.

Hemidog

#7
September 05, 2007, 12:27:36 PM
haven't put my trunk floor pans in yet, but the fitment looks good.

1970440RT

#8
September 18, 2007, 11:45:04 AM
Hemidog, which rockers were bad, the full or shorts?

If they're both bad, any good sources? 

I'm getting ready to pull the trigger on all my sheetmetal for my 68.

Hemidog

#9
September 18, 2007, 02:06:15 PM
I've used the full ones, and they fit really bad, poor bends and curves.
actually had to cut across the whole thing, cut a piece off, and weld it back together.
the curve near the bottom edge of the door isnt as sharp as it should be.
Haven't heard of any good repro rockers, maybe you can do some adjustments like i did, or fabricate your own.

Joshua

#10
September 18, 2007, 04:10:28 PM
Quote from: Hemidog on September 05, 2007, 12:27:36 PM
haven't put my trunk floor pans in yet, but the fitment looks good.

Be sure to let us know once you begin the install.....I'm currently rounding up sheetmetal for mine, and I need to do the entire trunk....
I plan to make patches for the 1/4's and rockers myself after reading some of the fitment issues.....
Print
Go Up Pages1
User actions