MoparStuart's Convertible Superbird Project Pic's

[moparstuart]

Stu, what are you going to do about carpeting in the front ??

hope to just use the original , split it under the console and stretch it .  If that doesnt work back up and punt   

[moparstuart]

   tunnel it done we used that super strong panel glue they use to glue quarter panels on with now

 Panel Adhesive   then we seam sealed everything

  I will seam seal the rest of it once i get the car home 


seam sealed and undercoated on the under side  now before the tranny goes in

[BigBlockSam]

looks good Stu . what paint you gonna spray on that ?

[moparstuart]

looks good Stu . what paint you gonna spray on that ?

a sealing primer for sure   , rust bullet on the other parts of the floor with surface rust

[BigBlockSam]

a sealing primer for sure   , rust bullet on the other parts of the floor with surface rust

[Highbanked Hauler]

Stu, what are you going to do about carpeting in the front ??

hope to just use the original , split it under the console and stretch it .  If that doesnt work back up and punt   

    As I said that I just thought, use 2 front rug halves and cut to fit..

[moparstuart]

Stu, what are you going to do about carpeting in the front ??

hope to just use the original , split it under the console and stretch it .  If that doesnt work back up and punt   

    As I said that I just thought, use 2 front rug halves and cut to fit..

if i half to i will , but i think i can make mine work

[Lighthorseman]

Nice work, guys!  I'm following along with interest, since I'm switching over to a four-speed later this winter myself...  Not quite the same, and I do NOT envy you having to do all this cutting and fitting.  I'm hoping my swap will be a lot more straightforward.  Interested to see if you can make your carpet fit, since that's one issue I was wondering about.

Fight the good fight, Stu!   

[moparstuart]

lighthorseman          this is a great tread for you 


                                    http://www.dodgecharger.com/forum/index.php/topic,95764.0.html

[Lighthorseman]

Great link, Stu!  Thanks!   

[thedodgeboys]

the viper ones are way more then 100.00 and american power train told me the viper one is better then anything they sell  

even if its $200 its better than a weekend tear down,  but if its bad or noisy  Im gonna   you...

Day 5 update        I told you to get a new throw-out bearing        

Well guess whats leaking all over my garage floor...

So now you get to take the trans out one more time just to change out the bearing  

[Charger-Bodie]

A classic case of tripping over a dollar to pick up a dime. Stuart you tight wad.

[1970Moparmann]

CRAP....

Stu, Stu, Stu........ Shame on you!

[BigBlockSam]

he never listens , he's a bad boy  needs a spanking

[moparstuart]

A classic case of tripping over a dollar to pick up a dime. Stuart you tight wad.

according to my viper friend expert and national viper club president , viper throw out bearing dont
do this     yup i;m a cheap skate

[The70RT]

A classic case of tripping over a dollar to pick up a dime. Stuart you tight wad.

according to my viper friend expert and national viper club president , viper throw out bearing dont
do this     yup i;m a cheap skate

When your air cleaner cost more on the Birdible than you daily driver cost.....you might be a tightwad 

[BigBlockSam]

viper throw out bearing dont do this

they do when there yours Stu   

[thedodgeboys]

A classic case of tripping over a dollar to pick up a dime. Stuart you tight wad.

according to my viper friend expert and national viper club president , viper throw out bearing dont
do this     yup i;m a cheap skate

When your air cleaner cost more on the Birdible than you daily driver cost.....you might be a tightwad 

Maybe if they are used regularly or driven but...
I think it sat so long that the seals dried up inside it.

Oh and did I say,
I told you so  

[Charger-Bodie]

viper throw out bearing dont do this

they do when there yours Stu   

As soon as someone suggested it woulg go bad you should have gotton a new one. Because if your luck is anything like mine, it was at that moment that it failed.

[moparstuart]

viper throw out bearing dont do this

they do when there yours Stu  

As soon as someone suggested it woulg go bad you should have gotton a new one. Because if your luck is anything like mine, it was at that moment that it failed.

  getting good practice at pulling it and putting it back in 

[tan top]

  good stuff  Stuart ,  looking good ,   

viper throw out bearing dont do this

they do when there yours Stu   

As soon as someone suggested it woulg go bad you should have gotton a new one. Because if your luck is anything like mine, it was at that moment that it failed.

yeah story of my life too  ,  ole murphy & his damn law ,   

[moparstuart]

 

[moparstuart]

 

[moparstuart]

 

[moparstuart]