News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Transmission Cross Member Question

Started by justin1987, August 03, 2007, 05:38:17 PM

Previous topic - Next topic

justin1987

I'm dropping my 440 and 727 transmission in my 69 Charger tomorrow and I had a question about the transmission cross member. My car was originally a 318 car. Will the transmission cross member still bolt up right even though I am putting a 440 in it? Thanks a lot guys.

RECHRGD

it should fit fine.  My car was originally a 318/904 car and now has a 440/727.  The conversion was in place when I bought it, so I'm not 100% sure, but I've never seen this to be a problem after reading threads on this and the old site for many years now.   Bob
13.53 @ 105.32

justin1987

Thanks!  :2thumbs:

I tried doing a search on here, but I couldn't find anything. I figured it would be okay, but I didn't want to wait until the last minute to figure out a solution if I had to.