News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Look What I did with Testors Model paints (69 Charger)

Started by triple_green, July 29, 2007, 05:26:15 PM

Previous topic - Next topic

triple_green

I had this 69 instrument Bezel left over. I ran it thru the dishwasher and then restored it using all testors model paints and sticks.

Didn't turn out too bad...except I couldn't get the white lettering any where as clear as the original silk screening.

3X
68 Charger 383 HP grandma car (the orignal 3X)

sixpack70

I'd roll with it like that. Looks pretty good to me.
1966 Falcon
1969 Mustang Mach 1
1970 Charger R/T 440+6 4spd

TruckDriver

Quote from: sixpack70 on July 29, 2007, 05:47:08 PM
I'd roll with it like that. Looks pretty good to me.
:iagree: :2thumbs:

Actually, I am planning to redo mine the same way as you. I used to build models, so it won't be anything new to me to do the detail work.
PETE

My Dad taught me about TIME TRAVEL.
"If you don't straighten up, I'm going to knock you into the middle of next week!" :P

triple_green

It would be fine for a nice driver. Obviously the chrome isn't quite as bright was the vaccum plating, but it actually matches the worn chrome pretty well. As I said before the white lettering isn't as crisp as the silk screening.

3X
68 Charger 383 HP grandma car (the orignal 3X)