News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

74 Rallye - Finished Pictures

Started by dvnen, July 04, 2007, 10:46:15 AM

Previous topic - Next topic

Ghoste

Car looks fantastic!  It makes me think of a 3rd gen Dirty Mary Crazy Larry car.

Charger1973

You may have been looking for the wrong ones?  There are 2 different styles but the wider trim goes to the SE cars.  Yours should have this trim to be correct.

http://cgi.ebay.com/ebaymotors/1971-1972-1973-CHARGER-ROCKER-MOLDING-TRIM_W0QQcmdZViewItemQQcategoryZ34204QQihZ016QQitemZ260135088840QQrdZ1QQsspagenameZWDVW

Nacho-RT74

Quote from: dvnen on July 09, 2007, 08:40:04 AM
Quote from: Charger1973 on July 08, 2007, 08:10:16 PM
I think they are referring to the stance, the front end is lower than the back.  Who did the chrome for you?  I need to have some done too.  You can get the rocker moldings on ebay I believe...

I had someone in toronto chrome the pieces.  I have seen the inside rocker mouldings on ebay, but not the outide ones (below the door).

I think he found the door sill plates
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

dvnen

now I am confused...if I recall, back 20yrs ago my car had the wide chrome rocker trim, not the skinny one as shown.  Was the skinny trim standard and the wide trim an option on the rallye's?

Charger1973

Id say no but I have been wrong before.  Ive never seen the wide trim on a rallye. 

BMOTOXSTAR

73' Dodge Rallye Charger 400/4BBL
06' Dodge Ram Quad Cab 4X4 HEMI
15' Dodge Dart 2.7 SXT

Nacho-RT74

wide trim is for 73-74 SE only from factory, however use same location rivets and you can interchange then just changing plastic clips. My car being a hardtop did came with SE mouldings but is a Venezuelan car so is a different story
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html