News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

8.75 Pumpkin to housing gasket p/n?

Started by Magnumcharger, May 28, 2007, 07:20:16 AM

Previous topic - Next topic

Magnumcharger

Replaced the gearset in the Deora replica, and need a current part number for the big gasket.
Anybody know what it is?
1968 Plymouth Barracuda Formula S 340 convertible
1968 Dodge Charger R/T 426 Hemi 4 speed
1968 Plymouth Barracuda S/S clone 426 Hemi auto
1969 Dodge Deora pickup clone 318 auto
1971 Dodge Charger R/T 440 auto
1972 Dodge C600 318 4 speed ramp truck
1972 Dodge C800 413 5 speed
1979 Chrysler 300 T-top 360 auto
2001 Dodge RAM Sport Offroad 360 auto
2010 Dodge Challenger R/T 6 speed
2014 RAM Laramie 5.7 Hemi 8 speed

moparguy01

RTV red silicone sealant.  :icon_smile_big:

i've used a gasket a few times and they always end up leaking. never had a leak with RTV

Magnumcharger

Just called NAPA..got these numbers:
P27930 - Rubber
P27930-TC - "Tough Cork"

Thanks to all who viewed.
1968 Plymouth Barracuda Formula S 340 convertible
1968 Dodge Charger R/T 426 Hemi 4 speed
1968 Plymouth Barracuda S/S clone 426 Hemi auto
1969 Dodge Deora pickup clone 318 auto
1971 Dodge Charger R/T 440 auto
1972 Dodge C600 318 4 speed ramp truck
1972 Dodge C800 413 5 speed
1979 Chrysler 300 T-top 360 auto
2001 Dodge RAM Sport Offroad 360 auto
2010 Dodge Challenger R/T 6 speed
2014 RAM Laramie 5.7 Hemi 8 speed

moparguy01

im telling you use RTV orange silicon sealant.....it works better.

RD

Quote from: moparguy01 on May 28, 2007, 12:28:25 PM
im telling you use RTV orange silicon sealant.....it works better.

listen to him, silicone is much better.  I know from personal experience.
67 Plymouth Barracuda, 69 Plymouth Barracuda, 73 Charger SE, 75 D100, 80 Sno-Commander

Chryco Psycho

I use the Felpro Gasket , my catalog is packed though & Ultra Blck silicone , the gasket helps to fill the not quite perfectly flat surface

Chatt69chgr

Both differentials in my 4X4 2005 Dodge Ram use red RTV on the differential covers with no gasket.  And absolutely no leaks.  RTV is one of the major reasons manufacturrers have been able to make cars that don't leak oil.  I just saw an episode of a car program on tv this weekend where they were installing a intake manifold on a SB chevy.  They threw away the end gaskets that came with the intake manifold gasket set and used red RTV.  It also completely seals valve covers.  All we had when I grew up was Permatex No 1,2, or 3.  Even with that messy stuff, the old valve cover gaskets always leaked oil.  The only RTV's that I am familiar with for car work are the blue and the red.  Red is the high temp variety and usually costs more.  Blue is what I usually use for oil pans, etc.  You do have to be careful to not squeeze the stuff completely out of the joint by initially tightening the nuts too tight.  I believe the correct procedure is to do an initial snug up and then let the RTV cure before the final tightening sequence.

Magnumcharger

I did use the blue RTV silicone under the front differential cover on my 1996 Ram 4x4 last summer with absolutely no leakage.
But to be honest, it's been about 20 years since I last changed out an 8.75 pumpkin, so I'm a bit rusty.
And I used to use the Permatex black glop back then.
1968 Plymouth Barracuda Formula S 340 convertible
1968 Dodge Charger R/T 426 Hemi 4 speed
1968 Plymouth Barracuda S/S clone 426 Hemi auto
1969 Dodge Deora pickup clone 318 auto
1971 Dodge Charger R/T 440 auto
1972 Dodge C600 318 4 speed ramp truck
1972 Dodge C800 413 5 speed
1979 Chrysler 300 T-top 360 auto
2001 Dodge RAM Sport Offroad 360 auto
2010 Dodge Challenger R/T 6 speed
2014 RAM Laramie 5.7 Hemi 8 speed