Drive Shaft length with Keisler and 383 in a -70 b-body?

[Chrg_1970_XP]

Ordered the Keisler perfect fit automatic-to-manual conversion for my -70 Charger.
They sent me everything except for the drive shaft. Since I´ll let a local work shop
do the installation I need all the parts before I give it to the workshop. Anyone who
have the measurements for the length of the drive shaft for a Charger with 383
and 8 3/4 rear end?
(It's a TKO 600)

/Stefan

[Charger-Bodie]

Ordered the Keisler perfect fit automatic-to-manual conversion for my -70 Charger.
They sent me everything except for the drive shaft. Since I´ll let a local work shop
do the installation I need all the parts before I give it to the workshop. Anyone who
have the measurements for the length of the drive shaft for a Charger with 383
and 8 3/4 rear end?
(It's a TKO 600)

/Stefan

just have them do it all except the shaft and then call them with the CORRECT measurement, it it very critical!! thats why they hanlde it that way!!!!

[Sinister68]

My driveshaft measurement was 58.5", BUT I agree with 1hot68: Its critical to have the shop that's performing the install make the actual measurement on your car.

Once you've called in your measurement, be prepared to wait about 3 weeks for the driveshaft to come in.

[Chrg_1970_XP]

Ok, thanks for the replies! Thought the measurements did not differ as long as you used the same model and engine/axle combination as comparison but maybe it does. Guess I´ve to have some patience. Wanted to shorten leadtimes since I live in Sweden but maybe Keisler can have the shaft ready in time.