CRS- CANT REMEMBER SHI$$

[400/6/PAC]

Thanks to the help of all you Guy's
I almost have my bumper assembly togather.
I'm down to a couple of pieces.
Can anyone tell me how this piece attaches.

[moparguy01]

what year car is it? that kinda looks like the peice that goes behind the front bumper on a third gen charger....

[UFO]

From a `70 right? If so bolts to side of fender,kinda like a support for the bumper.

[Nacho-RT74]

attaches with two 7/16" bolts to inner section of fender at a side of beams and is a bumper cushion. One of the bolts also supports a diagonal brace between fender and lower section of bumper where also attaches the outer grill support. Sure that one is driver side

[BB1]

Looks more like the bumper stop to the window regulator on a 2 gen.

[Nacho-RT74]

No, trust me, is the front of fender cushion, with Bumper.

[400/6/PAC]

Dang
Thats The second time I did that
Ask a question apout something and dont even give the year and make.
Sorry about that.
It is part of the front bumper on a 73 charger.
I had it marked as a bumper extionsion, but I removed it four years ago.
My next car I will take much better notes and lots of pics

[Charger1973]

I dont have a clear shot of it, but maybe this helps.  I only had one bolt in it in this picture, which is why its hanging down like that.  It should have 2 bolts and fit into the back side of the bumper.

[Nacho-RT74]

I was searching a pic like that

[400/6/PAC]

Yup thats the right part.
I might be able to figure it out with that pic.
Thanks Matt.