News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Cracked/warped 906 Head

Started by Heck2G14, January 19, 2007, 10:36:29 PM

Previous topic - Next topic

Heck2G14

Taking my headers off today and antifreeze was coming out of a few of the rear passenger side header bolt holes.  Normal? If it is I wont be to depressed Ill just have to get me some aluminum ones.   

Thanks,
Rob

firefighter3931

Rob, that is quite normal. welcome to the site, btw.  :wave:


Ron
68 Charger R/T "Black Pig" Street/Strip bruiser, 70 Charger R/T 440-6bbl Cruiser. Firecore ignition  authorized dealer ; contact me with your needs

Chryco Psycho

yeah all the header bolts go into the water jacket , the factory used studs & sealed them in place so the manifolds could be removed without leaking

Steve P.

And if you don't mind buying a set of aluminum heads I could use a set.. :devil:

Welcome to the best site in the world............ :cheers:
Steve P.
Holiday, Florida