News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Digital camera power supply question

Started by RECHRGD, January 01, 2007, 02:08:26 PM

Previous topic - Next topic

RECHRGD

I got anew Kodak Z612 Easy Share camera for Xmas.  Nobody had the power supply that Kodak lists in the accessories section of the manual so I bought A universal power adaptor from radio shack. The polarity of the male plug for the camera can be set in either position ( + voltage at the tip or - voltage at the tip).  Does anybody know the right polarity? I can find nothing on the Kodak site and I don't want to smoke my new camera.  thanks, Bob
13.53 @ 105.32

Paul G

Is there a little diagram on the camera? There should a be something right at the plug on the camera that shows polarity. Usually there is on most devices.
1972 Charger Topper Special, 360ci, 46RH OD trans, 8 3/4 sure grip with 3.91 gear, 14.93@92 mph.
1973 Charger Rallye, 4 speed, muscle rat. Whatever engine right now?

Mopars Unlimited of Arizona

http://www.moparsaz.com/#

RECHRGD

Thanks Paul.  I didn't see anyrhing on the camera, but now I notice a very small diagram on the rubber cover that goes over the power and data openings.  Now I'll just have to go find a magnifying glass so I can read it.  Bob
13.53 @ 105.32