SCORE! I'm happy now. *UPDATE* Found broadcast sheet

[Khyron]

Just got a center console, Shifter, All pieces, one small crack on the back for $100  

I start the swap over on tuesday.... I'll post some pics when I clean it up a litte I'm so excited I had to post.

Now for the question. am I going to have to drill the floor? or when I lift the carpet is there a plug in there?

[69bananabeast]

so this was originally a column shift?

[Troy]

Did you get the brackets with it? That's a pretty good deal even if you didn't. You'll need to cut a hole for the shifter but it's fairly obvious where it goes. The brackets weld on.

Troy

[41husk]

That is a great score congratulations. I wish my Charger was a console car.

[MoparYoungGun]

Congrats Khryon , that's a good score for sure.

[Silver R/T]

congratulations on good deal

[PlumBad70]

That is a great deal, congrats!!

[Telvis]

Congratulations!!

[Khyron]

so this was originally a column shift?

Yes, she's a column shift now. I'm working on getting the shifter delete part now

Did you get the brackets with it? That's a pretty good deal even if you didn't. You'll need to cut a hole for the shifter but it's fairly obvious where it goes. The brackets weld on.

Troy

I didn't get the brackets, but I figure thier easy enough to make. All the shifter assembly is there, so all I need to do is bend a few pieces to mount the console itself on

This weeks project

[KMPX2]

Have fun hope all goes well

[derailed]

Sounds like a real good deal. Where did you find it?

[BrianShaughnessy]

Cool breeze dude.

[cudaken]

 A little tip on the crack. While it is out, flip it over and use a body filler nick name is "Cat Hair". It is a body filler with fiber glass strand's in it, use to reinforces the crack from the bottom. Did that on my 69 12 year's ago and no other damage has happen to it.

I ruffed it from the under side with 80 grit paper and used about 3/4 of a inch of Cat Hair.

                                                  Cuda Ken

[Khyron]

Did as you suggested, Angle haired the broken section

Update. the shifter is in and adjusted. hits every gear great. I was missing the bottem trannie mount so I fabricated up a new one. Sorry. no pics of that. I tryed it was to dark under there

It even gets beter then that. As I was working. I FOUND MY BUILD SHEET!

Pics of the shifter and the build sheet. Take note instead of cutting up my carpet. I opted for a cleaner look

[Charger_Fan]

Wow, that build sheet is in amazing shape!


Oh & congrats on your console & stuff.

[Just 6T9 CHGR]

Good deal Jason!      Now I can update the registry and note that you are NOT looking for your build sheet!

PS....if you can send me a clear pic of it so I can add your options to the registry

[694spdRT]

Great score on the buildsheet! I am guessing from the marks you must have found it under a seat.

[Nupe]

WOAH!!!  The console score is one thing, but the broadcast sheet rocks! 

I'd love to find mine...    Only place left to look is under the headliner and it is too nice to pull. 

[Ghoste]

You should go buy some lotto tickets man.

[MoparYoungGun]

Wow, congrats on finding your buildsheet !

[mustanghater]

were did you find it?

[Lowprofile]

Some days things just fall in to place. Nice job on the shifter installation. 

[Khyron]

were did you find it?

it was tucked in the back section of the back seat. don't know why I pulled it, but i'm glad I did

and thanks for the positive comments on the shifter. I'm happy with it so far. shifts nice and stiff. I'm cleaning the console itself now, but I believe it's going to need a coat of paint. anyone have any suggestions on what kind to use?

[Lowprofile]

I'v heard guys having good luck with Plasti-Kote Paints.