News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

What fan shroud are you guys running?

Started by johnnycharger, June 28, 2021, 09:28:52 PM

Previous topic - Next topic

johnnycharger

Hi guys
My second fan has thrown blades off of it. Time for a shroud. What are you guys running? I dont want to switch to electric.  I have a stockish 383 with an Engineered Cooling Products radiator.

c00nhunterjoe

When i had a mechanical fan, i just used a stock plastic shroud.

johnnycharger

That is probably what I will wind up with

b5blue

Stock repop for me but I have stock type radiator and A/C. If ya don't have A/C I'd run a big ass direct drive stainless flex fan with no shroud.  :scratchchin: I ran 20 years in hot Florida with no issues. (The flex fan didn't clear the compressor clutch when I added A/C so I had to change.)

johnnycharger

I may go the flex route but I definitely want a shroud. I have had 2 fans break on me.

Kern Dog

I tried to post a picture but this cheesy forum and the picture posting limitations just pissed me off.... :brickwall:

I have a 26" ECP radiator. I used a stock fan shroud and the car stays cool even in 110 degree weather. I've driven the car around on hot days and it has yet to overheat. Am I lucky or is my combination well sorted out?

johnnycharger

I have the same radiator as you so that is good news. I will probably start hitting up the junk yards to see what I can find.

Kern Dog

I'm pretty sure that reproductions are available.

johnnycharger