News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Hinge pin replacement - What size drill bit?

Started by Dave22443, May 22, 2006, 07:26:01 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Dave22443

May 22, 2006, 07:26:01 PM
Does anyone know what size drill bit is needed to drill for new bushings in the hinge pins for a '68 Charger? (the door) I know I could eyeball it, but I don't have any drill bits big enough here at the house and I have to go buy one and I wanted to get it right the first time  :-\

Thanks!

America will never be destroyed from the outside. If we falter and lose our freedoms, it will be because we destroyed ourselves.
- Abraham Lincoln

eSJayDee

#1
August 15, 2006, 01:20:29 PM
Probably kind of late for you, but I just did mine & I saw your post.

I read from a kit from a different supplier that they said 13/32".
I used that on mine & it was the perfect size.  Couldn't push the bushings in by hand but could press them in w/ a big-ass C-clamp.
Print
Go Up Pages1
User actions