2nd Gen rear valance area repair

[hemi68charger]

Hey Gang..

My C500 is getting heavy into the body repair portion of the project... I was hoping to gain some lessons-learned in terms of the sequence of installation when it comes to reconstructing the rear valance area. I have an NOS rear valance that will be installed along with AMD rear quarter lower patches and corners.. Which parts go in 1st, 2nd, etc... There will be a new crossmember and complete trunk pan along with the quarter extensions/trunk-drops...

Thanks in advance...
Troy

[A383Wing]

trunk pan should go in first before the lower valance....it won't fit through the trunk lid opening

Bryan

[hemi68charger]

trunk pan should go in first before the lower valance....it won't fit through the trunk lid opening

Bryan

Hey Bryan.. Should have been more clear.. Sorry. The trunk first is a given. I was wondering about the installation relationship between the lower quarters, end caps and rear valance..

[cdr]

trunk pan should go in first before the lower valance....it won't fit through the trunk lid opening

Bryan

Hey Bryan.. Should have been more clear.. Sorry. The trunk first is a given. I was wondering about the installation relationship between the lower quarters, end caps and rear valance..

Lower 1/4s, Caps & then the valance