Restomod fuel system?

[SmashingPunkFan]

Has anyone resto modded their charger? 5.7 Hemi 5.9 Magnum 6.2 Hellcat 6.4 Hemi? If so what fuel tank, filter, pump? I'm curious what options are available for my '70 b body

[cdr]

Tanks Inc sells everything you need, I have their set up in my 68 512 cid with EFI

[Rolling_Thunder]

I modified my original fuel tank with a step, factory sending unit, but used a walbro 225 pump on a Mitsubishi eclipse fuel pump bracket. (metal and very similar to the common aftermarket plates out there now) -- it works just fine - but now Tanks Inc makes it way easier - they sell a nicer looking repro tank that does exactly the same things I did but better and it's super affordable - basically the same cost as a factory tank replacement.

Use their tank, mount a ~2005 corvette fuel filter (has built in fuel regulator) and plumb it up to your EFI engine of choice - done.

I am running a 6.1L Hemi I swapped in almost 8 years ago -

I am looking at their EFI tank for my 64 Polara project as well - I dont know of many other options out there for ease of install - other than a custom tank or modifying an original...    they are the only game in town (that i know of) for an EFI ready bolt in set up

[SmashingPunkFan]

Has anyone resto modded their charger? 5.7 Hemi 5.9 Magnum 6.2 Hellcat 6.4 Hemi? If so what fuel tank, filter, pump? I'm curious what options are available for my '70 b body

Tanks Inc sells everything you need, I have their set up in my 68 512 cid with EFI

Very awesome stuff. They are exactly who I found, and was thinking of ordering through. Very original design, with modernization added 👍

[JR]

Been running tanks Inc and a walbro for 4 years now on efi 440. Works great, I do reccomended them.

[303 Mopar]

I also have a tanksinc set up in my '68 with a 505 stroker and Sniper EFI.  For an extra charge, they will install the pump in the tank for you otherwise you can download their instructions on how to measure and cut for the pump.