Coolest sounding mufflers

[rrob]

Opinions on whats the coolest, bad ass sounding mufflers to use on a 440 with stock sized exhaust pipes?   

[Baldwinvette77]

3" exhaust   

[Lennard]

https://m.youtube.com/watch?v=AQBDlBn-SWE

[68X426]

Cut-outs. 

Search for threads.

[Mike DC]

 
Democrat or Republican?   Coke or Pepsi?  Catholic or Protestant?  '68 or '69 Charger?


There won't be a consensus on questions like this.  At best we might agree on some things to rule out.

[garner7555]

https://m.youtube.com/watch?v=AQBDlBn-SWE

That is pretty cool.       I doubt I will ever buy any of them, at $240 each, but it is a quality built muffler and very interesting.

[Nacho-RT74]

anything but flowmasters 40s... too much CHEBBBBBY and metallic slappy sound ( aside the droning )

[c00nhunterjoe]

My individual header tubes are stock exhaust pipe size. Does that count?

https://youtu.be/p6kcOMgYxzY

[mopar0166]

dynomax -  welded ultra flo is what I have on a 3 " exhaust.  sounds great.  he is some info on them.  Stainless steel construction for lifelong protection
100-percent Welded design for maximum durability, Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower, Straight-through design ensures unrestricted exhaust flow and reduces back pressure, CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone

[DixieRestoParts]

Standard Hemi Muffler.

[westcoastdodge]

Thrush glasspacks

[John_Kunkel]

Standard Hemi Muffler.

Anything else is just noise.

[Lennard]

Standard Hemi Muffler.

Anything else is just noise.

If it's too loud,  you're too old. 

[DAY CLONA]

Standard Hemi Muffler.

Anything else is just noise.

If it's too loud,  you're too old.  

Agreed!, the Hemi muffler is for trailer queens,....I run Stainless Works Chambered tube on a factory H pipe and full 2.5 factory system with tips on my 70 Daytona 440/6, just HP manifolds, H pipe, Chambered Tubes, and pipe/tips.....nice sweet sound, no backfire or rumble on forced high RPM downshifts, about the best sounding exhaust at idle or under throttle IMHO, no drone either at cruise....

I put them right after the H pipe crossover, low profile case approx 3-3 1/2" in diameter


Mike

[DAY CLONA]

Yeah it's a Mustang but at least you get to hear the difference between stock vs SS works Chambered mufflers and H pipe....  https://youtu.be/9ohdptUARnA

[Moparsaver]

Purple zoomies. 

[HANDM]

Thrush glasspacks

I put a set of Thrush somethings or other, standard type, 35 bucks apeice ones that are for 2.5 inch exhaust.
OMG does it sound awesome for a 318 Challenger!

[NHCharger]

I run Stainless Works Chambered tube on a factory H pipe and full 2.5 factory system with tips on my 70 Daytona 440/6, just HP manifolds, H pipe, Chambered Tubes, and pipe/tips.....nice sweet sound, no backfire or rumble on forced high RPM downshifts, about the best sounding exhaust at idle or under throttle IMHO, no drone either at cruise....

I put them right after the H pipe crossover, low profile case approx 3-3 1/2" in diameter


Mike

Huh, those are pretty cool. Maybe I'll upgrade the exhaust in my clone to those in a couple years. For now I have the ones(Thrush) that came with the car.

[6pkrtse]

I have always liked the Flowmaster sound. As long as the car has some compression & camshaft they sound great. If it is a stock ole pick up truck they sounds more like cherry bombs.

I have headers with a home built 3-1/2" X pipe exhaust that I made using elbows & straight pipe to the mufflers, reduced down to 3" after the mufflers up over the axle to the rear with the modified stock tips. I get compliments all of the time of how good it sounds & how stock everything looks. They always ask me who did the exhaust, then I say me....

[Just 6T9 CHGR]

Here are some videos of my Hemi High-Flow mufflers from Accurate LTD as well as the Dynomax Ultra-Flo's

Mild 440 with Stock HP exhaust manifolds, 2.5" diameter pipes to the tips

Hemi High-Flow
https://youtu.be/BoL7KfJsI-E

Ultra Flo's
https://youtu.be/0zMt_kCMSZA

[John_Kunkel]

Standard Hemi Muffler.

Anything else is just noise.

If it's too loud,  you're too old. 

Thank you for shopping at Platitudes R Us....please come again.

[morepower]

flowmaster 1 chamber mufflers

[pipeliner]

I love my TTI 3" x-pipe full Exhaust with Dynomax Super Turbo Mufflers. Nothing sound better.

[303 Mopar]

I love my TTI 3" x-pipe full Exhaust with Dynomax Super Turbo Mufflers. Nothing sound better.

I have the same setup but with h-pipe.  I have found that the x-pipe creates a higher pitched tone IMO, where as a h-pipe keeps the tone lower.

[c00nhunterjoe]

I like the ultraflos thriugh an x pipe. But despite popular belief, they will drone.

https://youtu.be/lPINTtGZAqo