News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

69 dash harness replacement

Started by charger01, April 26, 2006, 04:09:41 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

charger01

April 26, 2006, 04:09:41 PM
well the wire coming from my ignition switch to the firewall to the voltage regulater is fried.  A couple other wires close to the bulkhead are bare in spots as well.  Every other harness in my car is new.  contiplating buying a new dash harness.  Are these darn things hard to change?

Rolling_Thunder

#1
April 26, 2006, 10:41:28 PM
no - pretty much just a plug in deal - getting to it isnt too difficult either if you remove the dash ---  the most hurtful part is the price....   just put one in a 1969 Super Bee at work from Year One - took about an hour
1968 Dodge Charger - 6.1L Hemi / 6-speed / 3.55 Sure Grip

2013 Dodge Challenger R/T - 5.7L Hemi / 6-speed / 3.73 Limited Slip

1964 Dodge Polara 500 - 440 / 4-speed / 3.91 Sure Grip

1973 Dodge Challenger Rallye - 340 / A-518 / 3.23 Sure Grip

greenpigs

#2
April 29, 2006, 07:26:48 AM
I swapped mine out and and the dash was still in the car, not that hard. I suggest getting a shop manual and using the wire diagram that is in it. Also the manual has LOADS of other helpfull information.
1969 Charger RT


Living Chevy free
Print
Go Up Pages1
User actions