3RD Gen body components compatibility

[DREDILSKI]

Hello All,
Is there a chart/website/cross-reference page that would let you know what body parts are the same and what parts are year specific?

Just purchased a 72 rolling shell for my 73 resto and as best I can tell the trunk lid and doors should fit without issue. I know the quarters & fenders are slightly different, the rear window, etc.
So I wondered if someone put together a easy reference sheet to let you know what can and can not be used on specific 3rd gens (71/72/73&74).

Thanks,
Andre 

[71_Charger_R/T]

The doors are different!   The glass is all the same, just the rear side window openings are different. Roof skin is the same. Roof, hood and trunk lid will all fit but hood and trunk have subtle differences.
A decent reference guide is "Chrysler Muscle Car parts interchange manual 1968-1974"

https://www.amazon.com/Chrysler-Muscle-Interchange-Manual-1968-1974/dp/0760304203

[Nacho-RT74]

Some of this could need a revision, but mostly is on the right track
http://wichargerguy.proboards.com/board/16/interchangeability